Collaborative innovation cuts heat exchanger carbon footprint by 60% for hospital in Helsinki

When Laakso Joint Hospital in Helsinki set out to integrate the cooling system in the new hospital area, finding an efficient solution for heat transfer was key to secure long-term energy savings. Little did they know that they would be installing heat exchangers with a record-low product carbon footprint.

The urgent need to cut fossil carbon emissions is evident everywhere. It’s no longer just a goal but a critical necessity, requiring companies to invest in and implement cutting-edge technologies to accelerate progress toward net zero. It’s about turning net-zero commitments into immediate action.

A big challenge for companies today is reducing climate impact not only in their own operations but also upstream and downstream in their value chains. While individual actions to reduce emissions might seem small, cross-industry collaboration and innovative solutions can lead to substantial impacts. In Helsinki, Finland, we are witnessing such an impact. Thanks to collaboration across the value chain, heat exchangers will not only deliver energy-efficient cooling for a hospital but also feature a record-low product carbon footprint of Alfa Laval’s gasketed plate heat exchangers, achieving up to a 60 percent reduction in carbon emissions on the delivered units. This success story demonstrates how joint sustainability ambitions from steel suppliers to the end-customer can significantly reduce carbon emissions throughout the value chain.

Efficient cooling for Laakso Joint Hospital
Cities consume more than two-thirds of the world’s energy and play a crucial role in tackling the climate crisis. Heating and cooling, essential for all individuals, are among a city’s largest energy expenses. Most energy used for heating and cooling today is produced from fossil fuels, so this sector requires urgent action. Creating an impact not only in the actual operation of heating and cooling but also upstream in the value chain will have a greater effect.

When Laakso Joint Hospital in Helsinki were setting up the cooling system in the new hospital area, they needed to find an efficient heat transfer solution to save energy long-term. During 2025, they ended up installing heat exchangers with a record-low carbon footprint. This achievement was made possible by the collaboration of key players in the hospital’s value chain, using low-emission steel materials from SSAB and Outokumpu in the gasketed plate heat exchangers from Alfa Laval.




Net zero ambitions, collaboration and action: key drivers behind the success
Within the Concept Zero™ initiative at Alfa Laval, we are turning our net zero commitments into actions to reduce emissions from its heat exchanger’s entire value chain. The equipment in Laakso Joint Hospital is the first of its kind, reducing emissions by up to 60 percent on the unit itself compared to average material alternatives on the market. This achievement was made possible through collaboration with like-minded partners, SSAB and Outokumpu.

Alfa Laval, a world-leading manufacturer of heat transfer technology, along with the world-leading steel manufacturers SSAB and Outokumpu, all have net zero targets according to the Science Based Target initiative. We share the mindset that sustainability is not about compliance but about leading the industry towards a more sustainable future. Through joint ambitions and cross-border collaboration, we delivered these first-of-its-kind heat exchangers to the end-customer in Finland for efficient cooling of the hospital area.

From steel to energy-efficient heat transfer
The steel industry, both carbon and stainless, accounts for about 10 percent of global greenhouse gas emissions (IEA 2023). By 2050, emissions need to be cut by 90 percent compared to 2022 levels to reach the global sustainability targets (ResponsibleSteel 2024).

With gasketed plate heat exchangers consisting to a large part of carbon steel and stainless steel, reducing the carbon footprint of these units is crucial. Combining SSAB’s SSAB Zero™ steel and Outokumpu Circle Green^® stainless steel in the manufacturing of Alfa Laval’s gasketed plate heat exchangers allow for significant emission cuts in the main components of the units. By using these low-emission materials, the carbon footprint of the heat exchanger units is significantly reduced – up to 60 percent in the units specifically designed for the hospital in Helsinki.

The Alfa Laval gasketed plate heat exchangers are designed and manufactured for optimal performance and energy efficiency. With support from several stakeholders including the Alfa Laval business partner Gebwell, the design, delivery, and installation of five Alfa Laval TL10 gasketed plate heat exchangers were secured for the hospital in Helsinki. Optimally designed for the specific process these units will deliver outstanding cooling performance. With regular service, they will ensure energy savings year after year. Additionally, the units themselves carry a record-low carbon footprint.

www.alfalaval.com